Correlation Between HTTP Requests (Hierarchical)

The Arcus.WebApi.Logging library provides a way to add correlation between HTTP requests.

⚡ This page describes the (deprecated) Hierarchical HTTP correlation, see this page for information on the W3C HTTP correlation.

How This Works

This diagram shows an example of a user interacting with service A that calls another service B.

Three kind of correlation ID's are used to create the relationship:

• Transaction ID: this ID is the one constant in the diagram. This ID is used to describe the entire transaction, from begin to end. All telemetry will be tracked under this ID.
• Operation ID: this ID describes a single operation within the transaction. This ID is used within a service to link all telemetry correctly together.
• Operation Parent ID: this ID is create the parent/child link across services. When service A calls service B, then service A is the so called 'parent' of service B.

The following list shows each step in the diagram:

1. The initial call in this example doesn't contain any correlation headers. This can be seen as a first interaction call to a service.
2. Upon receiving at service A, the application will generate new correlation information. This correlation info will be used when telemetry is tracked on the service.
3. When a call is made to service B, the transaction ID is sent but also the operation parent ID in the form of a hierarchical structure.
4. The jkl part of this ID, describes the new parent ID for service B (when service B calls service C, then it will use jkl as parent ID)
5. Service B responds to service A with the same information as the call to service B.
6. The user receives both the transaction ID and operation ID in their final response.

💡 This correlation is based on the RequestId and X-Transaction-ID HTTP request/response headers, however, you can fully configure different headers in case you need to. 💡 The X-Transaction-ID can be overridden by the request, meaning: if the HTTP request already contains a X-Transaction-ID header, the same header+value will be used in the HTTP response.

Additional configuration is available to tweak this functionality.

Installation

This feature requires to install our NuGet package:

PM > Install-Package Arcus.WebApi.Logging

Usage

To fully benefit from the Arcus' HTTP correlation functionality, both sending and receiving HTTP endpoints should be configured.

Sending side

To make sure the correlation is added to the HTTP request, following additions have to be made:

using Microsoft.AspNetCore.Builder;
WebApplication builder = WebApplication.CreateBuilder();builder.Services.AddHttpCorrelation(options => options.Format = HttpCorrelationFormat.Hierarchical);builder.Services.AddHttpClient("from-service-a-to-service-b")                .WithHttpCorrelationTracking();
WebApplication app = builder.Build();

Then, the created HttpClient will be enhanced with HTTP correlation tracking. This means that the request will be altered to include the HTTP correlation information and the endpoint will be tracked as a HTTP dependency telemetry.

Alternatively, an existing HttpClient can be used to send a correlated HTTP request:

using System.Net.Http;using Microsoft.Extensions.DependencyInjection;using Arcus.WebApi.Logging.Core.Correlation;
var client = new HttpClient();
IHttpCorrelationInfoAccessor accessor = ... // From dependency injection.ILogger logger = ... // From dependency injection.
var request = new HttpRequestMessage(HttpMethod.Get, "https://localhost/service-b");await client.SendAsync(request, accessor, logger);

💡 The HTTP correlation tracking can also be configured, see this section for more information.

Receiving side

To make sure the correlation is added to the HTTP response, following additions have to be made:

using Microsoft.AspNetCore.Builder;
WebApplicationBuilder builder = WebApplication.CreateBuilder();builder.Services.AddHttpCorrelation(options => options.Format = HttpCorrelationFormat.Hierarchical);
WebApplication app = builder.Build();app.UseHttpCorrelation();app.UseRouting();app.UseRequestTracking();

⚠ Because the correlation is based on ASP.NET Core middleware, it's recommended to place it before the .UseRouting call.

⚡ To use HTTP correlation in Azure Functions, see this dedicated page, as the configuration on the receiving is slightly different.

The UseRequestTracking extension will make sure that the incoming HTTP request will be tracked as a 'request' in Application Insights (if configured). For more information on HTTP request tracking, see our dedicated feature documentation page;

Configuration

The HTTP correlation can be configured with different options to work for your needs.

Configuring HTTP correlation services

The HTTP correlation is available throughout the application via the registered IHttpCorrelationInfoAccessor. This HTTP correlation accessor is both used in sending/receiving functionality. Some extra options are available to alter the functionality of the correlation:

using Microsoft.AspNetCore.Builder;
WebApplicationBuilder builder = WebApplication.CreateBuilder();builder.Services.AddHttpCorrelation(options =>{    // ⚠ Use hierarchical format to make use of these options.    options.Format = HttpCorrelationFormat.Hierarchical;
    // Configuration on the transaction ID (`X-Transaction-ID`) request/response header.    // ---------------------------------------------------------------------------------
    // Whether the transaction ID can be specified in the request, and will be used throughout the request handling.    // The request will return early when the `.AllowInRequest` is set to `false` and the request does contain the header (default: true).    options.Transaction.AllowInRequest = true;
    // Whether or not the transaction ID should be generated when there isn't any transaction ID found in the request.    // When the `.GenerateWhenNotSpecified` is set to `false` and the request doesn't contain the header, no value will be available for the transaction ID;     // otherwise a GUID will be generated (default: true).    options.Transaction.GenerateWhenNotSpecified = true;
    // Whether to include the transaction ID in the response (default: true).    options.Transaction.IncludeInResponse = true;
    // The header to look for in the HTTP request, and will be set in the HTTP response (default: X-Transaction-ID).    options.Transaction.HeaderName = "X-Transaction-ID";
    // The function that will generate the transaction ID, when the `.GenerateWhenNotSpecified` is set to `false` and the request doesn't contain the header.    // (default: new `Guid`).    options.Transaction.GenerateId = () => $"Transaction-{Guid.NewGuid()}";
    // Configuration on the operation ID (`RequestId`) response header.    // ----------------------------------------------------------------
    // Whether to include the operation ID in the response (default: true).    options.Operation.IncludeInResponse = true;
    // The header that will contain the operation ID in the HTTP response (default: RequestId).    options.Operation.HeaderName = "RequestId";
    // The function that will generate the operation ID header value.    // (default: new `Guid`).    options.Operation.GenerateId = () => $"Operation-{Guid.NewGuid()}";
    // Configuration on operation parent ID request header (`Request-Id`).    // ------------------------------------------------------------------
    // Whether to extract the operation parent ID from the incoming request following W3C Trace-Context standard (default: true).    // More information on operation ID and operation parent ID, see [this documentation](https://docs.microsoft.com/en-us/azure/azure-monitor/app/correlation).    options.UpstreamService.ExtractFromRequest = false;
    // The header that will contain the operation parent ID in the HTTP request (default: Request-Id).    options.UpstreamService.HeaderName = "x-request-id";
    // The function that will generate the operation parent ID when it shouldn't be extracted from the request.    options.UpstreamService.GenerateId = () => $"Parent-{Guid.newGuid()}";});

Configuring HTTP correlation client tracking

When sending tracked HTTP requests, some options can be configured to customize the tracking to your needs.

using Microsoft.AspNetCore.Builder;
WebApplicationBuilder builder = WebApplication.CreateBuilder();builder.Services.AddHttpClient("from-service-a-to-service-b")                .WithHttpCorrelationTracking(options =>                {                    // The header that will be used to set the HTTP correlation transaction ID. (Default: X-Transaction-ID)                    options.TransactionIdHeaderName = "X-MyTransaction-Id";
                    // The header that will be used to set the upstream service correlation ID. (Default: Request-Id)                    options.UpstreamServiceHeaderName = "X-MyRequest-Id";
                    // The function to generate the dependency ID for the called service.                     // (service A tracks dependency with this ID, service B tracks request with this ID).                    options.GenerateDependencyId = () => $"my-request-id-{Guid.NewGuid()}";
                    // The dictionary containing any additional contextual inforamtion that will be used when tracking the HTTP dependency (Default: empty dictionary).                    options.AddTelemetryContext(new Dictionary<string, object>                    {                        ["My-HTTP-custom-key"] = "Any additional information"                    });                });

The same options can be configured when sending correlated HTTP requests with an existing HttpClient:

using System.Net.Http;using Microsoft.Extensions.DependencyInjection;using Arcus.WebApi.Logging.Core.Correlation;
var client = new HttpClient();
IHttpCorrelationInfoAccessor accessor = ... // From dependency injection.ILogger logger = ... // From dependency injection.
var request = new HttpRequestMessage(HttpMethod.Get, "https://localhost/service-b");await client.SendAsync(request, accessor, logger, options =>{    // The header that will be used to set the HTTP correlation transaction ID. (Default: X-Transaction-ID)    options.TransactionIdHeaderName = "X-MyTransaction-Id";
    // The header that will be used to set the upstream service correlation ID. (Default: Request-Id)    options.UpstreamServiceHeaderName = "X-MyRequest-Id";
    // The function to generate the dependency ID for the called service.     // (service A tracks dependency with this ID, service B tracks request with this ID).    options.GenerateDependencyId = () => $"my-request-id-{Guid.NewGuid()}";});

Dependency injection

To use the HTTP correlation in your application code, you can use a dedicated marker interface called IHttpCorrelationInfoAccessor. This will help you with accessing and setting the HTTP correlation.

Note that the correlation is a scoped dependency, so will be the same instance across the HTTP request.

using Microsoft.AspNetCore.Mvc;using Arcus.WebApi.Logging.Core.Correlation;
[ApiController][Route("api/v1/order")]public class OrderController : ControllerBase{    private readonly IHttpCorrelationInfoAccessor _accessor;
    public OrderController(IHttpCorrelationInfoAccessor accessor)    {        _accessor = accessor;    }
    [HttpPost]    public IActionResult Post([FromBody] Order order)    {        CorrelationInfo correlation = _accessor.GetCorrelationInfo();
        _accessor.SetCorrelationInfo(correlation);    }}

Logging

As an additional feature, we provide an extension to use the HTTP correlation directly in a Serilog configuration as an enricher. This adds the correlation information of the current request to the log event as a log property called TransactionId, OperationId, and OperationParentId.

Example

• TransactionId: A5E90591-ADB0-4A56-818A-AC5C02FBFF5F
• OperationId: 79BB196A-B0CC-4F5C-B48A-AB87850346AF
• OperationParentId: 0BC101AC-5E41-43B5-B020-3EF467629E3D

Usage The enricher requires access to the application services so it can get the correlation information.

using Microsoft.AspNetCore.Builder;using Serilog;
WebApplicationBuilder builder = WebApplication.CreateBuilder();builder.Host.UseSerilog((context, serviceProvider, config) =>{    return new LoggerConfiguration()        .Enrich.WithHttpCorrelationInfo(serviceProvider)        .WriteTo.Console()        .CreateLogger();});
WebApplication app = builder.Build();app.UseHttpCorrelation();app.UseRouting();app.UseRequestTracking();